Lake Shore Cryotronics

Recent Posts

New app note on use of M81-SSM to minimize common-mode noise interference

If you're planning to perform low-level electrical measurements in a low-temperature environment, such as to characterize samples in a cryostat or dilution refrigerator, then this new app note may be [...]

Lake Shore 8600 Series VSM used for magnetic ceramics research

An AIP Advances article just published online details recent research into a “unique class” of nanocomposite spinel Co-ferrites for which our 8600 Series VSM was used for both magnetometry [...]

Special guests of Lake Shore Cryotronics this week

Visiting us this week in Ohio was Prof. Victorino Franco of the Univ. of Seville (right), shown with Lake Shore’s Brad Dodrill and the book they recently co-edited, “Magnetic Measurement Techniques [...]

New app note on sensitive EQE characterization measurements

The landscape of photodetector and solar cell technologies has been rapidly expanded with the emergence of numerous novel material paradigms, including organic semiconductors, perovskites, and [...]

How does a demagnetizer work? YouTuber uses our teslameter to find out

In the words of our favorite YouTuber, “I have always wondered how the inexpensive magnetizer-demagnetizer tool works. What’s inside it? And why are there stairs inside the demagnetizer opening?”

[...]

The lock-in amplifier explained and reimagined

Measurement of electrical signals, voltage, and current is one of the most important methods used by researchers to characterize electronic materials. But electrical signals are often at very low [...]

Read our 'Low-Level Measurements of Nanostructures' tech note

The study of new semiconducting materials, high temperature superconductors, photovoltaic devices, and organic electronic materials typically requires low-level sourcing and measurement because the [...]

Ferromagnetic resonance (FMR) measurements using our MCS-EMP or 8600 VSM

New from Lake Shore Cryotronics: an installation kit that enables you to easily use a NanOsc Instruments PhaseFMR and PhaseFMR-40 spectrometer with our MeasureReady™ MCS-EMP or 8600 Series VSM [...]

The technology behind the M81-SSM’s precise signal synchronization

One of the most unique features of our new modular MeasureReady™ M81-SSM synchronous source measure system is its patent-pending MeasureSync™ signal synchronization technology. This real-time [...]

What are the differences between pulse tube and Gifford-McMahon cryocoolers?

It’s a question we get often from customers who are evaluating their options for sample cooling: What are the main differences between pulse tube (PT) cryocoolers and Gifford-McMahon (GM) cryocoolers?

Subscribe to the blog

CATEGORIES

see more

ARCHIVES